top of page

Just 4½ Inches Thick: The Story of My 180-Foot Column-Free Zigzag Wall-Theni

Oct 25
7 min read

By Architect Jerry | Jerry Architect


This wall began with a simple thought: what could a folded sheet of paper teach us about building?

A 4½-inch-thick brick wall. A continuous 180-foot run. No intermediate columns. This is the defining feature of my custom zigzag compound wall a built experiment inspired by the simple act of folding paper.


A sheet of paper feels delicate when it is flat. Fold it into a zigzag, and the way it holds its shape changes. That small observation became the starting point for one of my own architectural experiments—a custom brick compound wall extending approximately 180 feet without intermediate columns, reaching around six feet above the natural ground level.


Designed and built by me, Architect Jerry of Jerry Architect, this project explores how the shape of a wall can become an active part of its design.

It is also a personal project: an opportunity to take an idea out of a sketchbook, work through its construction on site, and see it become a real boundary with its own character.


The Idea: Let the Wall Take a Different Shape


A compound wall is often treated as something that happens after the main design is complete. It marks a boundary, provides privacy, and becomes the edge of a property.


I wanted to give that edge more thought.


Could the wall itself have a form worth looking at? Could its geometry help us reconsider the usual arrangement of a straight wall divided by columns? Could we use familiar materials in a different way and reduce the overall construction cost?


The paper-folding idea offered a direction.


Instead of following a single straight plane, I developed the wall as a repeated zigzag. Each change in direction became part of the overall composition. The result was a continuous brick boundary with depth, rhythm, and a changing relationship with sunlight.


The folds were the starting point of the construction idea, as well as the wall’s visual identity.


180 Feet Without Intermediate Columns


The defining feature of this project is its approximately 180-foot length without intermediate columns.


By “column-free,” I mean that the wall does not use the repeated vertical columns commonly seen along a conventional compound wall. It still has a foundation and a concrete belt at its base.


That distinction matters because the finished brickwork is only the visible part of the project. Beneath it is a sequence of work that includes the rubble foundation, the raised base, and the belt from which the zigzag masonry begins.


My intention was to develop the wall as a connected construction, where the foundation, base, brick bonding, and folded layout were considered together.


Starting Below Ground: The RR Foundation


Construction began with excavation and an RR—random rubble—stone foundation.


For the below-ground portion, I used dry stone masonry up to ground level, followed by a raised rubble base. This stage established the line and level from which the rest of the wall would grow.


Although the finished wall draws attention through its brickwork, the foundation was a substantial part of the process. It required the same care and attention as the visible work above it.


I documented this stage in the first part of the project’s reel series, showing how the experiment began below ground before its zigzag form became visible.


The Concrete Belt: Connecting the Base and Brickwork


Above the rubble work, I used brickwork on either side to form the edges for a cast-in-place concrete belt containing steel reinforcement.


This created the base from which I began the upper zigzag wall.


The belt is an important part of the project story because “zero-column” does not mean there is no concrete or reinforcement anywhere in the construction. The approach here was to build without intermediate vertical columns while retaining a concrete belt at the base.


The second reel follows this transition: the preparation of the belt, the concrete work, and the beginning of the brick masonry above it.


At this point, the idea started becoming readable on site.


Building the Zigzag in Brick


Above the belt, I built approximately five feet of zigzag brickwork, bringing the overall wall to around six feet above the natural ground level.


The masonry continues along the approximately 180-foot boundary, with repeated changes in direction giving the wall its folded appearance.


Getting that rhythm right required attention at every turn. The angles, brick courses, and connections had to work together so that the wall read as one continuous design.


As construction progressed, the visual effect became clearer. Some faces caught direct sunlight, while others fell into shade. The folds gave an ordinary material a different presence.


This is one of the things I value most about the finished form: its character comes from how the bricks are arranged.


The Custom Finger-Joint Detail


One of the details I developed for this project was a custom brick-lapping arrangement, which I describe as a finger-joint method.


At the meeting points, alternating brick courses overlap into the adjoining masonry by approximately two inches. The intention was to interlock the brickwork at these connections rather than simply bring separate faces together along an unbonded edge.


This detail was repeated through the zigzag junctions.


For me, it became an essential part of translating the folded-paper idea into masonry. The overall shape gave the wall its direction, while the brick bonding resolved how one part met the next.


The third reel focuses on this stage: the brickwork, the turns, and the repeated connections that gradually formed the full boundary.


What Happened When a JCB Hit the Wall


During tree-cutting work near the site, a JCB accidentally struck the wall.


It was an unexpected incident, and I documented what happened. Seeing the wall remain standing afterward was a memorable moment in the project.


As the person who had developed and built it, I naturally felt encouraged by that observation. It gave me another real-world moment to record alongside the construction process.


However, an accidental impact is not a controlled structural test. I share the footage as part of this wall’s story, rather than as proof of a particular load capacity or a guarantee of how another wall would perform.


Approximately 50% Lower Cost on This Project


Based on my comparison for this project, the wall achieved an estimated 50% reduction in construction cost compared with a regular column-supported compound wall.


That was a significant outcome for an experiment that began with a question about form.


Avoiding repeated intermediate columns changed the construction scope. The intended exposed finish also formed part of the overall approach to materials and cost.


The saving is specific to this project and the conventional alternative I compared it against. Ground conditions, labour rates, material prices, wall dimensions, and finishing choices can change the result elsewhere.


For me, the value of this outcome is that it encourages a useful design question: before adding more material, can we reconsider the way we are building?


Keeping the Brickwork Exposed

The masonry is complete, and the final exterior treatment is the next stage.


I intend to retain the exposed brick character, allowing the courses, joints, and folds to remain visible. The finishing work will focus on the exterior coating and the details needed to complete the wall.


The project also includes a damp-proof course, or DPC, and a coping treatment at the top. Recycled glass bottles are being incorporated into the coping as an anti-climb detail.


The final reel will document this finishing stage and show how the completed surface works with the brickwork beneath it.


I want the finished wall to retain the honesty of its construction. The material and the method should remain visible.


A Boundary That Changes With the Light


What began as a construction experiment has also become an exploration of light and shadow.


The zigzag surfaces give sunlight different faces to meet. Across the day, the wall’s appearance changes as the angled planes brighten and darken.


There is a simple pleasure in seeing this happen with exposed brick. The visual depth comes from the form itself, and the long boundary gains a rhythm that can be experienced while walking beside it.


For me, that is where the project becomes more than a cost comparison. It becomes an architectural element with its own expression.


Documenting the Process, Step by Step


I have documented this project through a series of reels so that the finished wall can be understood through the work behind it:


* Part 1 — The foundation: Excavation, random rubble work, and the beginning of the base.

* Part 2 — The belt and first brick courses: Forming the concrete belt and setting out the upper wall.

* Part 3 — The zigzag brickwork: Building the folded form and showing the custom lapped connections.

* Final part — The exterior finish: Completing the coating, exposed appearance, and coping details.


The accidental JCB impact is documented separately as another event in the wall’s construction story.


Sharing these stages matters to me. A photograph shows the final appearance, but the construction footage reveals the decisions, effort, and details behind it.


What This Wall Means to Me


This project gave me the chance to follow a small observation through to full-scale construction.


A folded piece of paper became the starting point for a 180-foot brick boundary. Familiar materials—stone, brick, concrete, and steel—became part of a custom approach shaped by experimentation on site.


I am proud of the result: a column-free zigzag wall that stands with a distinctive character and achieved a substantial estimated cost saving on this project.


At Jerry Architect, I want to keep making room for this kind of exploration—asking questions, studying materials, and finding architectural possibilities in everyday elements.


Sometimes, that possibility begins with something as small as a fold.


Have a site or an idea you would like to explore?

Get in touch with Jerry Architect to discuss a custom architectural approach shaped around your project.


Project note: This article documents a specific built experiment, not a standard construction detail. Foundation design, reinforcement, masonry bonding, movement joints, and coping details require assessment for each site


Comments


COPYRIGHTED © 2023.JERRISJO

bottom of page